Energizer · Powerboards & surge protection
Energizer ET-6OSPSSW Six-Outlet Individually Switched Surge Powerboard
The Energizer ET-6OSPSSW is a six-outlet Australian surge powerboard with an individual switch for each socket. It allows compatible connected appliances to be turned on or off separately, useful at a desk or equipment area where only some devices are needed at a time.
Useful features
At a glanceSix Australian sockets
Six Australian sockets: supplies the outlet arrangement shown in the exact-model manual.
Individual socket switches
Individual socket switches: allow connected appliances to be controlled separately without unplugging them.
175 J surge protection
175 J surge protection: includes the surge-status LED, without promising all-event protection.
Built-in overload control
Built-in overload control: provides the protection function described in the manual.
10 A / 2400 W combined maximum
10 A / 2400 W combined maximum: applies across all connected outlets rather than to each socket independently.
0.9 m attached lead
0.9 m attached lead: gives the distance to a suitable wall connection.
Indoor dry-use requirement
Indoor dry-use requirement: makes the manual's installation environment clear before choosing a location.
The useful features
- Six Australian sockets: supplies the outlet arrangement shown in the exact-model manual.
- Individual socket switches: allow connected appliances to be controlled separately without unplugging them.
- 175 J surge protection: includes the surge-status LED, without promising all-event protection.
- Built-in overload control: provides the protection function described in the manual.
- 10 A / 2400 W combined maximum: applies across all connected outlets rather than to each socket independently.
- 0.9 m attached lead: gives the distance to a suitable wall connection.
- Indoor dry-use requirement: makes the manual's installation environment clear before choosing a location.
The useful details
Know what
you’re getting.
The Energizer ET-6OSPSSW is a six-outlet Australian surge powerboard with an individual switch for each socket. It allows compatible connected appliances to be turned on or off separately, useful at a desk or equipment area where only some devices are needed at a time.
The surge-protection rating is 175 J, with a surge-status LED and built-in overload control. The attached 0.9 m lead connects the board to a suitable wall supply. Keep the combined load at or below 10 A and 2400 W: the total limit applies across all six outlets, rather than separately to each one.
Use the board indoors in a dry location. Do not cover it, and stop using it if the body or lead is damaged. Plan enough clearance around the sockets for the connected plugs, and ensure the short lead reaches the intended wall outlet without strain.
The protection functions address the stated surge and loading conditions, rather than guaranteeing protection from every disturbance. This is a mains power-distribution board, not a battery backup: connected equipment still depends on the wall supply. Separate switching changes which outlets are active without increasing the overall capacity.
A closer look
Specifications.
The details that matter.
Specifications
What’s in the box
1 unit ET-6OSPSSW powerboard
1 unit User manual
1 unit Warranty card
Compatibility
Maximum load: 2400 W
Manual maximum load: 2400 W (Exact-model manual specification panel)
App and setup
The manufacturer page states individually switched outlets, overload protection, a surge indicator and 175 J surge protection. It specifies a 230–240 V, 50 Hz, 10 A input and 2400 W maximum load. The switches let individual appliances be turned off without unplugging them, within the total rating.
Use indoors in dry places; do not cover the board, daisy-chain it, exceed 2400 W, or use a damaged board or cord. Follow the exact-model user manual.
Use only within the 10 A / 2400 W total limit, indoors and dry.
Australian wall outlet.
230–240 V AC, 50 Hz, 10 A input; 2400 W maximum combined load. Australian socket configuration is shown in the manual.